Z offset controls how close your nozzle is to the bed, and getting it right is the difference between prints sticking or failing. To set Z offset correctly, lower the nozzle until filament is slightly squished—not round and not smeared. If your first layer fails, this is almost always the root cause. This post contains […]
3D printer calibration
How to Fix Layer Shifting in 3D Printing (Fast & Permanent Fixes)
Layer shifting happens when your printer loses position mid-print, causing layers to misalign. To fix layer shifting in 3D printing, tighten belts, reduce speed, and make sure nothing is blocking movement. If your print suddenly “jumps” to the side and continues, that’s not a slicer issue—it’s a mechanical or motion problem. What’s Actually Causing Layer […]
Under-Extrusion in 3D Printing (Fix It Fast With These Steps)
Under-extrusion happens when your printer isn’t pushing enough filament, causing gaps, weak layers, or missing lines. To fix under-extrusion fast, check for clogs, increase temperature slightly, and make sure your extruder is gripping filament properly. If your prints look thin, brittle, or incomplete, you’re dealing with a flow problem—and guessing won’t fix it. Here’s the […]
Easily Calibrate Your 3D Printer’s Z Offset (Ender 3)
When beginning your 3d printing journey it probably feels like a million things could go wrong. Is my bed level, is it too cold, is my filament wet? And the list goes on… Maybe, you need to calibrate your Z offset. Maybe, you aren’t even sure what the heck I’m talking about. Either way, stick […]