If your first layer isn’t sticking, your nozzle is either too high, your bed is dirty, or your settings are off. Fixing first layer adhesion comes down to proper Z offset, a clean surface, and slower first layer settings. If you don’t fix this, nothing else matters—every print starts with the first layer. This post […]
3d print not sticking
Why PLA Won’t Stick to the Bed (And How to Fix It Fast)
PLA won’t stick to the bed when your first layer isn’t properly squished, or the surface isn’t prepared correctly. To fix PLA not sticking fast, adjust your Z offset, clean your build plate, and dial in your first layer settings. If your print peels up, slides around, or never sticks in the first place—you’re dealing […]