The best layer height for most 3D printing is 0.2 mm. It gives the best overall balance of print time, surface quality, and easy setup on a typical 0.4 mm nozzle. Use 0.12 mm when you want noticeably finer detail. Use 0.28 mm when you want faster prints and do not care as much about […]
layer height guide
Nozzle Size vs Speed: Which Nozzle Diameter Prints Faster?
Nozzle size vs speed is simple in theory: a bigger nozzle can usually print faster because it can lay down more plastic per pass. In real use, though, a bigger nozzle only helps if your hotend can melt enough filament, your layer height and line width make sense, and you are willing to trade some […]