Brim, skirt, and raft are all first-layer helpers—but they do completely different things. Use a skirt for priming, a brim for adhesion, and a raft only when you really need it. If you’re guessing which one to use, you’re leaving print quality (and success rate) on the table. This post contains affiliate links. As an […]
3d print brim
How to Fix Warping in 3D Printing (Stop Corners Lifting)
Warping in 3D printing happens when the edges of your print lift off the bed as it cools. To fix warping fast, improve bed adhesion, increase bed temperature, and control cooling. If your prints start fine but corners peel up mid-print, you’re dealing with uneven cooling—not bad settings. This post contains affiliate links. As an […]